Many things can be learned from failure, including the failure of building structures. By knowing the causes, you can be expected to know how to avoid them. In terms of building construction it is unique, because it is a product of a series of activities from various disciplines of expertise, perhaps from various companies, which are contractually separated. The responsibility is also not centered on one party. This might make it complicated to determine who is actually responsible, if there is a structural failure or building construction. However, if a failure occurs, the first victim is the project owner. On the other hand, perhaps you also need to take a look at the free foundation repair estimate in Dallas TX.
According to experts, good building construction must meet 3 criteria: strong, rigid and stable. Therefore, a building is said to be defective or has a construction failure, if the structural elements do not meet one or all of the above criteria.
Aside from that, the causes of structural failure can be categorized into two types: human and natural effects. Due to human activity, it can be intentional or not. For example, wrong planning, implementation, or use. Nature is caused by strong winds that exceed existing regulations, or large earthquakes, and fires.
Structure failure criteria include 3 things. First, the building is not strong, meaning that all the stresses that occur in the cross section of the structure, exceed the specified. The building is not rigid, for example excessive deflection, vibrating floor plates and so on. And the building is unstable, if there is buckling in the excessive column and a decrease in foundation. “A building that does not fulfill one of these criteria can be considered a failure, let alone not meet all three,” he explained.
The building was not designed against earthquakes
Experts have also faced cases of very severe structural failure, due to the interpretation of inappropriate soil investigation data. The building consists of 2 floors, using a shallow foundation that sits at a depth of -1m above +/- 2m thick soil which is not perfectly compacted. Compaction should be carried out at least 90 percent of the Proctor standard, but in the specs, it is only set at 75 percent.